Mini 4Kx2K Full HD Signal DVI Fiber Optical Extender
Model: FSN-D4K-SM
Mini 4Kx2K DVI is High-Definition Multimedia Interface recently has become increasingly popular in the application of video and audio transmission system, DVI Fiber Optic Extender uses one fiber without any copper wire inside, where radio frequency interference phenomenon is literally rule out, which shows the advantage of high performance and good signal quality as well as low cost.
The FSN-D4K-SM series is a high performance 4K Optical Extender that transmits high resolution DVI signals over extreme distances using one fiber. This extender supports HDMI v1.4 signals with resolutions up to 4K (3840*2160/30p) over cable distances up to 80km(default 1.4km).
Description
Features
- Support DVI 1.0 and HDMI v1.4
- Support learn and store the display EDID info.
- Support resolutions up to 3840×2160/30P
- 7.1 channel LPCM, 192 kHz, 24-bit
- Support 3840*2160/60P(YUV 420)
- Plug and Play ,Built-in EQ(Receiver)
- Support 4K/30P@ Single-Link
- One fiber，One-way
- Bandwidth up to 10.2 Gbps
- Up to 80Km distance by Single-Mode Fiber
- Does not support the HDCP and CEC
- Low RFI / EMI
- Support 3D TV pass-through
Technical Indexes
| Parameter | Specifications |
| Compliance | DVI1.0，HDMI v1.4 |
| Bandwith | 10.2 Gbps |
| Supported Resolutions | 3840×2160/30P,3840*2160/60P(YUV 420), 4096*2160/60P(YUV 420) |
| Digital Audio Support | 7.1 channel LPCM, 192 kHz, 24-bit audio capability |
| Connections | |
| DVI Input / DVI Output | 1x DVI-D 18+1 Male connector |
| Optical | 1x SFP+ port |
| Cable | |
| Fiber Cable | 9/125μ Single-Mode Fiber:≤80Km(default 1.4km) |
| DDC Support | |
| EDID Support | An EDID memory built into the Tx module can learn and store the display EDID info. |
| HDCP Pass-through Support | Does not support the HDCP and CEC |
| Mechanical | |
| Construction | High-impact Alufer enclosure |
| Dimensions (L x W x H) | 69mm x 42 mm x 18.2 mm |
| Net Weight | FSN-D4K-SM-S: 100 g FSN-D4K-SM-R: 100 g |
| Environmental | |
| Operating Temperature | 32° to +112° F. (0° to +50° C) |
| Storage Temperature | -40° to +185° F. (-40° to +85° C) |
| Operating Humidity | 5% to 80% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| Power Requirements | |
| External AC Power Adapter | Input: 100-240VAC / 50-60Hz 0.2A Output: 5VDC, 2.0A |
| Power Consumption | FSN-D4K-SM-S: 3 watts FSN-D4K-SM-R: 3.5 watts |
| Warranty | |
| Limited Warranty | 1 year |
Application
Technical Indexes
Standards: HDMI 1.3; HDCP 1.2
Compressed format: H.264
Maximum pixel clock: 165MHz
Maximum data rate: 6.75Gbps
Resolution Max: 1920X1080p@60Hz
Connector: HDMI-A
Impedance: 100Ω
Interface: 3.5mm earphone seat
Signal direction: Unidirectional
Signal type: Digital
IR frequency: 20-60kHz
Interface: RJ45
Transmission distance: CAT6—200M
Power supply: POE power supply 5V IN
Power dissipation: MAX 5W
Temperature Operating: -5℃ ~ +70℃
Humidity Operating: 5% ~ 90%
Dimension: 95.25*71.2*26.6mm
The warranty: 1 year free warranty
Panel Transmitter
Receiver
HDMI IN/HDMI OUT: HDMI signal input/output
UTP: Ethernet RJ45 interface
IR IN / IR OUT: IR input / IR output
RESET: Press for 5 second to restore system setting to factory default
LED indicator: Description
PWR: Power indicator, ON: power is normal
LINK: Link status indicator, ON: link is normal
STATUS: Video signal connection indicator, Flashing slowly: system run normally, Flashing quickly: system communicate
