1-port Data and Power IEEE802.3at 30W PoE Injector Adapter

Model: FSN-POE300

Power over Ethernet (PoE) adapter is designed to supply operational power to surveillance cameras and wireless LAN devices such as access points, bridges and routers. It enables power current to travel on the Ethernet network cable, thus eliminates the need to directly connect a power supply to the wireless LAN device. Power and Data are combined on a single cable, thus eliminating the need for extra power lines and also reducing installation costs and manpower.

 

Technical Indexes

Parameter Specifications
Features • Conforms to IEEE802.3af standard RJ-45

• Conforms to IEEE802.3af standard RJ-45

• Data Input Interface RJ-45 10/100Base-TX/

• Data Input Interface RJ-45 10/100/1000Base-TX

• Output Port Power Cable Included
Data Rate 10/100Mbps

10/100/1000Mbps

Input Power 90-240V AC ,50-60Hz
Output Power 15.4W Max IEEE802.3af

30W Max IEEE802.3at

Wiring • Data provide over pairs 1/2(+) and 3/6(-)
• Power over spare pairs 4/5(+) and 7/8(-)
LED Display YES
Operating Temperature 0 to +40°C,
Humidity Max. 95% RH(non-condensing)
Dimension 61×40×12(H×D×W)
Weight 200g

 

Description

Features

  • Up to 15.4W/30W of PoE Power
  • Fully IEEE802.3af/IEEE802.3at compliant
  • Supports 10/100M or 10/100/1000M LAN environment
  • Plug & Play
  • No configuration required
  • Reduced Installation cost
  • Safe and Reliable Power to WLAN Access Points
  • Automatic Detection and Protection of Non–standard Ethernet Terminals

Application

Technical Indexes

Standards: HDMI 1.3; HDCP 1.2
Compressed format: H.264
Maximum pixel clock: 165MHz
Maximum data rate: 6.75Gbps
Resolution Max: 1920X1080p@60Hz
Connector: HDMI-A
Impedance: 100Ω
Interface: 3.5mm earphone seat
Signal direction: Unidirectional
Signal type: Digital
IR frequency: 20-60kHz
Interface: RJ45
Transmission distance: CAT6—200M
Power supply: POE power supply 5V IN
Power dissipation: MAX 5W
Temperature Operating: -5℃ ~ +70℃
Humidity Operating: 5% ~ 90%
Dimension: 95.25*71.2*26.6mm
The warranty: 1 year free warranty

Panel Transmitter

Receiver

HDMI IN/HDMI OUT: HDMI signal input/output
UTP: Ethernet RJ45 interface
IR IN / IR OUT: IR input / IR output
RESET: Press for 5 second to restore system setting to factory default
LED indicator: Description
PWR: Power indicator, ON: power is normal

LINK: Link status indicator, ON: link is normal
STATUS: Video signal connection indicator, Flashing slowly: system run normally, Flashing quickly: system communicate